DX SeriesDX2150/2250/2350 Specifications/Specification

Output Circuit Type complementary bipolar output with multi-step high efficiency circuit

Output Power in watts 150W 250W 350W

FTC : 30 Hz to 18kHz 1% THD 8 ohms 150 250 350

Both channels driven 4 ohms 250 400 550

Bridged Mode at 1% THD 8 ohms,1kHz 500 800 1100

Input Sensitivity for rated power into 8 onms 1.25Vrms 1.25Vrms 1.25Vrms

Input Impedance 20 k ohm balanced, 10 k ohm unbalanced

Voltage Gain 64x(36 dB) for 8 ohm load

Dynamic Headroom at 4 ohms 2dB

Distortion, SMPTE < 0.02%

Frequency response at 1 watt 30 Hz to 20 Khz, 8 ohms, LF Filter bypassed: +0, -3 dB

Noise(unweighted) 100 dB below rated output from 30 Hz to 20 kHz, 8 ohm load

Controls Front Panel- AC power switch, CHA Gain control, CHB Gain control,

                            Clip Limiter on/off controls for each channel and switches for

                            Stereo or Bridge Mode. breaker for channel.

Connectors Inputs: XLR female, TRS(1/4-inch); Outputs: Speakon outputs

Weight Steel chassis: 2.50kg

Dimensions 19.0”wide x 2”(1U) high x 9.21” deep (483x44x234mm)